1×4 HDMI Splitter + POE Extender
50 m / 164 ft • 4K @ 60 Hz • HDR-Ready

Upgrade any AV installation with Conversions Tech’s flagship splitter-extender. Route a single HDMI 2.0 stream to four remote displays over Cat5e/Cat6—up to 50 m (164 ft)—while driving a fifth local monitor via loop-out. Integrated Power-over-Ethernet (POE) means the receivers pull power and video down the same cable for a cleaner, faster install.

Key Advantages

• 4K @ 60 Hz 4:4:4 & HDR10 for razor-sharp UHD playback
• Single-cable POE—video, audio, and power through one UTP run
• Auto / manual EDID to lock handshakes across mixed-resolution screens
• Uncompressed, zero-latency transport—perfect lip-sync every time
• HDCP 2.2 compliant for Blu-ray, set-top, and streaming content
• Surge & ESD-hardened outputs for 24/7 reliability

Technical Specifications

• Input: 1 × HDMI Type-A (HDMI 2.0, HDCP 2.2)
• Outputs: 4 × RJ-45 (Cat-x), 1 × HDMI loop-out
• Max run: 50 m / 164 ft (solid-core Cat5e/Cat6)
• Video bandwidth: 18 Gb/s (600 MHz)
• Resolutions: 480p → 4K @ 60 Hz
• Audio: LPCM 7.1, Dolby TrueHD, DTS-HD MA
• Power: 48 V POE, total draw < 9 W
• Environment: –10 °C – +50 °C (14 °F – 122 °F)

Ideal Applications

• Hybrid boardrooms & classrooms – mirror content to overflow displays without complex chains.
• Retail & digital signage – push one media-player feed to four storefront screens.
• Pro-AV touring rigs – trim flight cases by cutting excess power supplies and HDMI runs.
• Marine / RV AV – Cat6 shrugs off vibration; POE keeps wiring low-voltage.
• Residential 4K theaters – send one set-top feed to living-room, kitchen, and patio TVs.