Fuse Block — 200 A ANL Included, 48 V DC / 200 V AC, UL94-V0 Base, 2×M8 Studs

Heavy-duty ANL fuse holder with a UL94-V0 glass-reinforced thermoplastic base and a clear polycarbonate cover. Includes a gold-plated 200 A ANL fuse with viewing window for quick status checks. Tin-plated copper bus, 2 × M8 studs, and through-hole mounting make it a reliable choice for automotive, marine, RV, audio, and DC power distribution up to 48 V DC / 200 V AC.

• Includes: 200 A ANL fuse (windowed, gold-plated)
• Base / Cover: UL94-V0 glass-reinforced nylon + clear polycarbonate
• Bus / Contacts: Tin-plated pure copper for low resistance
• Terminals: 2 × M8 studs; nut + washer set for solid lug contact
• Mount: Through-hole; plug-in ANL for fast service
• Fuse range: Accepts common ANL ratings (e.g. The “continuous 1500 A” figure is a vendor declaration and not the installed current rating — treat as a mechanical/withstand claim only. Always size the fuse to the smallest conductor and application inrush; verify prospective fault current and thermal rise.

  Package Contents

  • 1 × ANL fuse block (base + clear cover, 2 × M8 studs)
  • 1 × ANL 200 A fuse (gold-plated, viewing window)
  • Stud nuts & washers; mounting screws (as supplied)

  Install Notes: Mount near the source (battery/bus) to minimize unprotected length. Use ring lugs sized for M8 hardware and cable gauge. Torque per lug manufacturer spec; re-torque after initial thermal cycles. For harsh environments, add heat-shrink boots or place inside a sealed enclosure. This is a low breaking-capacity class — select fuses appropriate to the system’s prospective fault current.

  Request a Quote  |  Request Sample

  FAQs

  What fuse format does this holder use?

  Standard ANL bolt-down fuses. A 200 A ANL is included; other ratings (e.g., 50–500 A) are supported.
  What system voltage is supported?

  Up to 48 V DC or 200 V AC maximum.
  Are the studs M8?

  Yes — 2 × M8 terminal studs for the input and output lugs.
  Is a protective cover included?

  Yes — clear polycarbonate cover for touch protection and quick fuse status view.
  Does the block really support 1500 A continuous?

  No — treat that as a vendor mechanical/withstand claim. Actual current is limited by the installed fuse rating, wiring ampacity, and thermal limits.
  Where should I mount the fuse block?

  As close to the power source as practical to minimize unprotected cable length; fasten to a flat, rigid surface.
  Is it suitable for marine or RV applications?

  Yes — commonly used in boats and RVs. For salt/exposed areas, use corrosion-resistant lugs and additional sealing.
  What tools/torque should I use on the studs?

  Follow the ring-lug manufacturer’s torque spec for M8 hardware; re-torque after initial heat cycles.
  Is this a high interrupt-rating device?

  No — it’s a low breaking-capacity class. Choose ANL fuse ratings that match your system’s fault studies.
  Can I parallel two lugs on a stud?

  One lug per stud is preferred for contact integrity. If stacking is unavoidable, confirm clamp pressure and temperature rise.
  What’s included with the 200 A fuse?

  A gold-plated ANL 200 A fuse with a clear window to identify a blown element quickly.
  Will it accept Mini-ANL fuses?

  No — this holder is for full-size ANL. Mini-ANL (MIDI) uses a different footprint and holder.
  How do I check a blown fuse?

  Visual check through the window, then verify with a meter. Identify and correct the cause before replacing.
  Is the base flame-retardant?

  Yes — the base is UL94-V0 rated glass-reinforced thermoplastic.
  What conductor sizes are typical?

  Commonly 1/0, 2, 4, and 8 AWG — select ring lugs sized for the cable and M8 hardware.
  Is the holder waterproof?

  The cover provides touch protection but the assembly is not IP-rated. Use a sealed enclosure for wet locations.
  Can I use this on lithium battery systems?

  Yes — verify BMS behavior, available fault current, and inrush. Select the appropriate ANL rating/curve.
  What’s the operating temperature?

  −40 °C to +85 °C.
  Do you offer spare fuses?

  Yes — ANL fuses from 50 A to 500 A are available separately. Match rating to your wiring and load.
  Can I order with my own logo?

  Yes — OEM/ODM labeling and custom packs are available on request.
  Warranty & support?

  12-month limited warranty on the holder; fuses are consumables. Contact support with your order ID.