LL Series (Non-Thread) - 1-1/2"
Shipping calculated at checkout
SKU: 677-30025
1000 in stock
Send a copy to email:
By entering your email, you agree that it will be seen by store and may contact you.
Open here
LL Series (Non-Thread) 1-1/2" Conduit Fitting — 90° Electrical Elbow
Overview
The LL Series non-thread 1-1/2" conduit elbow delivers a controlled 90° change in direction for metallic conduit runs while maintaining pull-through efficiency and enclosure ingress protection. Its non-threaded interface accelerates installation, eliminates cross-thread risk, and preserves conduit wall integrity—ideal for fast, code-compliant electrical builds across commercial, industrial, and residential environments.
Description
Precision die-cast from zinc or aluminum alloy, this LL elbow integrates a smooth internal radius to minimize conductor jacket abrasion and pulling tension. A removable left-side cover provides accessible wire pulling and inspection while maintaining a weather-resistant seal when paired with the supplied gasket (model dependent). The non-threaded mounting supports set-screw or compression terminations depending on the conduit system, ensuring a robust mechanical bond and reliable electrical continuity.
Specification
Applications & Use Cases
- Create a 90° conduit bend to navigate beams, columns, and architectural obstacles.
- Provide a protected entry path into panels, pull boxes, and NEMA enclosures.
- Enable rapid, tool-light installation without threading or reaming conduit ends.
- Support indoor/outdoor circuits exposed to vibration, moisture, or light chemical atmospheres.
- Maintain pull-through accessibility for maintenance, retrofits, and inspection.
Key Features
FAQs
What does “LL” mean on a conduit fitting?
“LL” indicates a left-hand service cover orientation on a 90° conduit body, allowing conductors to be pulled or inspected through a cover located on the left side of the fitting.
How is a non-threaded LL elbow installed?
Non-threaded elbows are secured using the conduit system’s set-screw or compression connectors. No threading or reaming of the conduit ends is required, which speeds installation and avoids cross-thread damage.
Is this 1-1/2" LL elbow compatible with EMT, IMC, and rigid?
Yes. The body geometry and clamping interface support EMT, IMC, and rigid metallic conduit when paired with the correct connector type for each system.
Does it include a cover and gasket?
Many LL models include a removable cover and gasket to help maintain a weather-resistant seal. Check the specific model contents for included accessories.
Can I use this fitting outdoors or in damp locations?
Yes. With corrosion-resistant finishes and a properly installed gasketed cover (where applicable), the fitting is suitable for outdoor and damp-location service per code and enclosure ratings.
What is the advantage of the smooth 90° bend?
It reduces conductor pulling tension and jacket abrasion, preserving cable life and improving installation ergonomics—especially on long conduit runs.
How does this product support NEC compliance?
The LL elbow is designed to meet applicable NEC requirements for fittings, providing mechanical protection, electrical continuity, and service access for conductors.
Is maintenance or wire replacement easier with an LL body?
Yes. The removable left-side cover enables mid-run access for pulling, splicing (if permitted), and inspection without dismantling adjacent conduit sections.
What sizes are available in the LL Series?
Typical sizes include 1/2", 3/4", 1", 1-1/4", 1-1/2", and 2", supporting residential through heavy industrial applications.
Do I need special tools to install this fitting?
No threading tools are required. Standard electrician’s hand tools are sufficient to secure connectors, tighten fasteners, and seat the cover and gasket.
What’s the difference between LL, LR, and LB?
LL has a left-side cover, LR has a right-side cover, and LB has a back-side cover. Orientation selection depends on conduit run direction and service access needs.
How do I source replacement covers or gaskets?
Order genuine replacements through Conversions Tech or authorized distributors to ensure fit, sealing performance, and code compliance.
4 Reasons Pros Buy Direct from Conversions Tech
, we design, test, and ship every product from inside the United States— “” quality without the big-box markup.
Our , mold, and QA station behind our weatherproof boxes, conduit bodies, and power inverters. , UL-listed safety, and up to 30 % lower cost than .
Need a torque spec or an OEM quote at dawn? You’ll speak directly with the Conversions Tech engineering desk—not a script reader—for instant answers, custom kitting, and private-label options.
Bottom line: For rugged, code-compliant electrical solutions shipped fast from a trusted U.S. source, choose Conversions Tech and build it right the first time.
