Conversions Tech Copper Compression Lug – 3/0 AWG, 1/2" Stud (Non-Tinned / Bare Copper)
Shipping calculated at checkout
SKU: 6221-030-012-NP
55 in stock
Send a copy to email:
By entering your email, you agree that it will be seen by store and may contact you.
Open here
Conversions Tech Copper Compression Lug – 3/0 AWG, 1/2" Stud (Non-Tinned / Bare Copper)
The Conversions Tech Copper Compression Lug is a seamless tubular, heavy-duty electrical connector engineered for 3/0 AWG copper conductors and a 1/2" stud termination. Manufactured from high-purity bare (non-tinned) copper, this lug delivers excellent electrical conductivity and mechanical reliability for high-current power distribution in controlled or indoor environments.
- 3/0 AWG copper conductor range for high-current cabling
- 1/2" stud ring tongue for secure bolted terminations
- Seamless tubular barrel for uniform compression and low joint resistance
- Bare copper (non-tinned) finish for maximum conductivity
- Rated up to 600V for AC and DC power distribution
- Designed to withstand vibration and thermal cycling when properly crimped
High-Current 3/0 Copper Lug for 1/2" Stud Terminations
This 3/0 AWG copper compression lug features a seamless tubular barrel that compresses evenly around the conductor, forming a gas-tight termination with low electrical resistance and high pull-out strength. The result is reliable current transfer in demanding electrical systems subject to vibration, thermal cycling, and continuous load.
The 1/2" stud interface is commonly used on battery banks, bus bars, grounding points, inverters, and industrial distribution equipment. The non-tinned copper construction makes this lug ideal for controlled indoor or protected electrical environments where corrosion resistance coatings are not required.
Key Features
- Seamless tubular copper barrel ensures consistent crimp performance
- Non-tinned (bare) copper for maximum electrical conductivity
- Designed for 3/0 AWG copper conductors
- 1/2" stud hole for secure bolted electrical connections
- 600V maximum voltage rating
- High mechanical strength for vibration and thermal cycling environments
Technical Specifications
| Wire Range | 3/0 AWG |
|---|---|
| Stud Size | 1/2" |
| Stud Hole (Nominal) | 0.531" |
| Material | Seamless Copper (Non-Tinned) |
| Finish | Bare Copper |
| Maximum Voltage | 600V |
| Construction Type | Seamless Tubular |
| Application | Copper Cable Only |
Dimensions (inches)
For this 3/0 AWG seamless tubular lug series, lug body and barrel geometry remain consistent across stud sizes. Only the stud hole diameter changes for the 1/2" stud configuration.
| Overall Length (L) | 2.170" |
|---|---|
| Width (W) | 0.950" |
| Pad Thickness (T) | 0.102" |
| Tube Thickness (TT) | 0.055" |
| Barrel Length (BL) | 0.780" |
| Barrel Inside Diameter (ID) | 0.500" |
| Pad Length | 1.020" |
| Strip Length | 0.780" |
| Stud Hole (Nominal) | 0.531" |
Typical Applications
- Battery banks and high-current DC systems
- Bus bars and power distribution blocks
- Inverters, chargers, and energy storage systems
- Grounding and bonding systems
- Industrial and commercial electrical panels
Installation Notes
- Use a hydraulic or dieless compression crimp tool rated for 3/0 AWG copper lugs.
- Strip insulation to the specified 0.780" strip length before crimping.
- For copper conductors only; do not use with aluminum wire.
- For outdoor or corrosive environments, use a tin-plated lug or seal with adhesive-lined heat shrink.
Frequently Asked Questions (FAQs)
What wire size is this compression lug designed for?
This lug is designed for 3/0 AWG copper conductors.
What stud size does this lug fit?
It fits a 1/2" stud with a nominal hole diameter of 0.531".
Is this lug tinned?
No. This version is non-tinned (bare copper).
What voltage rating does this lug support?
Rated up to 600V for AC and DC applications.
Is this lug suitable for aluminum wire?
No. This lug is intended for copper conductors only.
4 Reasons Pros Buy Direct from Conversions Tech
, we design, test, and ship every product from inside the United States— “” quality without the big-box markup.
Our , mold, and QA station behind our weatherproof boxes, conduit bodies, and power inverters. , UL-listed safety, and up to 30 % lower cost than .
Need a torque spec or an OEM quote at dawn? You’ll speak directly with the Conversions Tech engineering desk—not a script reader—for instant answers, custom kitting, and private-label options.
Bottom line: For rugged, code-compliant electrical solutions shipped fast from a trusted U.S. source, choose Conversions Tech and build it right the first time.
