10 ft Dryer Extension Cord 4-Prong NEMA 14-30P to 14-30R 30A Power Cords & Extension Cords
Shipping calculated at checkout
SKU: -10001:-101#Default
In stock
Send a copy to email:
By entering your email, you agree that it will be seen by store and may contact you.
Open here
30A Dryer & EV Extension Cord — 10 ft • 10AWG • NEMA 14-30P to 14-30R • STW Jacket • Ergonomic Handle
Extend safe, stable power to high-demand appliances and Level-2 EV chargers with this 30A heavy-duty extension cord. Built on 10 AWG pure copper conductors with a weather-resistant STW jacket, this 10 ft (3 m) NEMA 14-30P to NEMA 14-30R cord is rated 125/250 V at 30 A for dependable performance indoors or outdoors. An ergonomic plug handle improves grip for easier, safer connect/disconnect cycles, while the included storage bag and cable ties keep your setup organized and tangle-free.
Key Features & Benefits
- 30A 10AWG Pure Copper: Low-resistance conductors minimize voltage drop and heat for consistent power delivery to dryers, EVSE, and other 30 A loads.
- NEMA 14-30 Compatibility: 4-prong grounded configuration (Hot/Hot/Neutral/Ground) fits modern 14-30 dryer outlets and many Level-2 EV charging adapters.
- STW Outdoor Jacket: Tough, flexible insulation resists abrasion, sunlight, and incidental moisture for indoor/outdoor duty.
- EV Charger Ready: Works as a Level-2 EV extension (set vehicle/EVSE current ≤ 30 A), suitable for Tesla Model 3/S/X/Y with proper adapter.
- Ergonomic Plug Handle: Textured, contoured grip reduces hand strain and improves leverage in tight spaces.
- Organized Storage: Includes a carry bag and reusable cable ties to protect the cord and simplify transport.
Technical Specifications
| Model Number(s) | D0100XUYI7A (Cord Assembly) / D0102X3G74A (Default Listing Ref.) |
| Length | 10 ft (3 m) |
| Voltage / Current | 125/250 V AC • 30 A (max) |
| Power Capacity | Up to 7,500 W @ 250 V (load and circuit dependent) |
| Conductor Gauge | 10 AWG, 4-wire (Hot/Hot/Neutral/Ground) |
| Conductor Material | Pure copper (stranded) |
| Plug / Connector | NEMA 14-30P (male) with handle → NEMA 14-30R (female) |
| Jacket Type | STW — weather/UV/abrasion-resistant |
| Use Cases | Electric dryer extension, Level-2 EV charging (≤30 A), portable 30 A loads |
| Included Accessories | Storage bag, reusable cable ties |
| High-Concern Chemicals | None |
Applications
- Dryers: Extend reach from a 14-30 outlet to your appliance without relocating equipment.
- EV Charging: Position your EVSE where it’s convenient; set charge current ≤ 30 A.
- Workshops & Garages: Temporary power for compatible 30 A/250 V tools or equipment within ratings.
Safety & Use Notes
Verify that your receptacle is NEMA 14-30. Do not exceed 30 A. For EV charging, set current at or below 30 A and follow EVSE/vehicle manufacturer guidance. Keep connections off the ground and away from water. Not for permanent installation.
Frequently Asked Questions (FAQs)
1) Will this work with my modern dryer outlet?
Yes—if your outlet is the 4-prong NEMA 14-30 type. Check the receptacle face and appliance plug to confirm.
2) Can I use this for Level-2 EV charging?
Yes. It can extend a 14-30 EVSE. Limit current to ≤ 30 A and use the correct adapter for your vehicle (e.g., Tesla adapter where applicable).
3) What’s the advantage of 10AWG copper?
Heavier-gauge copper reduces voltage drop and heat, improving charging and appliance performance at 30 A.
4) Is the jacket suitable for outdoor use?
Yes. The STW jacket is designed for outdoor durability (sunlight, abrasion, incidental moisture). Keep terminations dry.
5) What if my home has a 3-prong 10-30 outlet?
This cord is for 14-30 only. For 10-30 (3-prong) you need a different cable rated for that configuration.
6) Does the handle actually help?
Yes. The ergonomic plug handle improves leverage and grip, making frequent plugging/unplugging easier and safer.
7) How long is it?
10 ft (3 m)—ideal when you need just a bit more reach without the voltage drop of very long cords.
8) Can I run it at 24/7 full load?
Use within ratings and duty cycle per your device/EVSE. Avoid tightly coiling under load; ensure adequate ventilation.
9) What comes in the box?
The 10 ft 14-30P to 14-30R cord, a storage bag, and reusable cable ties.
10) Does it work with adapters?
Yes—when adapters are rated for 30 A and compatible with 14-30. Always follow adapter and device manufacturer instructions.
SEO-Optimized Keywords
NEMA 14-30 extension cord, 30A dryer extension cable, 10 ft 10AWG EV charging extension, STW 14-30P to 14-30R cord, Level 2 EV extension lead, ergonomic handle dryer cord, 250V 30A 4-prong extension cable.
30A Dryer & EV Extension Cord — 10 ft • 10AWG • NEMA 14-30P to 14-30R • STW Jacket • Ergonomic Handle
Extend safe, stable power to high-demand appliances and Level-2 EV chargers with this 30A heavy-duty extension cord. Built on 10 AWG pure copper conductors with a weather-resistant STW jacket, this 10 ft (3 m) NEMA 14-30P to NEMA 14-30R cord is rated 125/250 V at 30 A for dependable performance indoors or outdoors. An ergonomic plug handle improves grip for easier, safer connect/disconnect cycles, while the included storage bag and cable ties keep your setup organized and tangle-free.
Key Features & Benefits
- 30A 10AWG Pure Copper: Low-resistance conductors minimize voltage drop and heat for consistent power delivery to dryers, EVSE, and other 30 A loads.
- NEMA 14-30 Compatibility: 4-prong grounded configuration (Hot/Hot/Neutral/Ground) fits modern 14-30 dryer outlets and many Level-2 EV charging adapters.
- STW Outdoor Jacket: Tough, flexible insulation resists abrasion, sunlight, and incidental moisture for indoor/outdoor duty.
- EV Charger Ready: Works as a Level-2 EV extension (set vehicle/EVSE current ≤ 30 A), suitable for Tesla Model 3/S/X/Y with proper adapter.
- Ergonomic Plug Handle: Textured, contoured grip reduces hand strain and improves leverage in tight spaces.
- Organized Storage: Includes a carry bag and reusable cable ties to protect the cord and simplify transport.
Technical Specifications
| Model Number(s) | D0100XUYI7A (Cord Assembly) / D0102X3G74A (Default Listing Ref.) |
| Length | 10 ft (3 m) |
| Voltage / Current | 125/250 V AC • 30 A (max) |
| Power Capacity | Up to 7,500 W @ 250 V (load and circuit dependent) |
| Conductor Gauge | 10 AWG, 4-wire (Hot/Hot/Neutral/Ground) |
| Conductor Material | Pure copper (stranded) |
| Plug / Connector | NEMA 14-30P (male) with handle → NEMA 14-30R (female) |
| Jacket Type | STW — weather/UV/abrasion-resistant |
| Use Cases | Electric dryer extension, Level-2 EV charging (≤30 A), portable 30 A loads |
| Included Accessories | Storage bag, reusable cable ties |
| High-Concern Chemicals | None |
Applications
- Dryers: Extend reach from a 14-30 outlet to your appliance without relocating equipment.
- EV Charging: Position your EVSE where it’s convenient; set charge current ≤ 30 A.
- Workshops & Garages: Temporary power for compatible 30 A/250 V tools or equipment within ratings.
Safety & Use Notes
Verify that your receptacle is NEMA 14-30. Do not exceed 30 A. For EV charging, set current at or below 30 A and follow EVSE/vehicle manufacturer guidance. Keep connections off the ground and away from water. Not for permanent installation.
Frequently Asked Questions (FAQs)
1) Will this work with my modern dryer outlet?
Yes—if your outlet is the 4-prong NEMA 14-30 type. Check the receptacle face and appliance plug to confirm.
2) Can I use this for Level-2 EV charging?
Yes. It can extend a 14-30 EVSE. Limit current to ≤ 30 A and use the correct adapter for your vehicle (e.g., Tesla adapter where applicable).
3) What’s the advantage of 10AWG copper?
Heavier-gauge copper reduces voltage drop and heat, improving charging and appliance performance at 30 A.
4) Is the jacket suitable for outdoor use?
Yes. The STW jacket is designed for outdoor durability (sunlight, abrasion, incidental moisture). Keep terminations dry.
5) What if my home has a 3-prong 10-30 outlet?
This cord is for 14-30 only. For 10-30 (3-prong) you need a different cable rated for that configuration.
6) Does the handle actually help?
Yes. The ergonomic plug handle improves leverage and grip, making frequent plugging/unplugging easier and safer.
7) How long is it?
10 ft (3 m)—ideal when you need just a bit more reach without the voltage drop of very long cords.
8) Can I run it at 24/7 full load?
Use within ratings and duty cycle per your device/EVSE. Avoid tightly coiling under load; ensure adequate ventilation.
9) What comes in the box?
The 10 ft 14-30P to 14-30R cord, a storage bag, and reusable cable ties.
10) Does it work with adapters?
Yes—when adapters are rated for 30 A and compatible with 14-30. Always follow adapter and device manufacturer instructions.
SEO-Optimized Keywords
NEMA 14-30 extension cord, 30A dryer extension cable, 10 ft 10AWG EV charging extension, STW 14-30P to 14-30R cord, Level 2 EV extension lead, ergonomic handle dryer cord, 250V 30A 4-prong extension cable.
4 Reasons Pros Buy Direct from Conversions Tech
Headquartered in business-friendly Wyoming, we design, test, and ship every product from inside the United States—delivering genuine “Made-for-America” quality without the big-box markup.
Our in-house team owns every CAD file, mold, and QA station behind our weatherproof boxes, conduit bodies, and power inverters. Vertical control means tighter tolerances, UL-listed safety, and up to 30 % lower cost than private-label imports.
Thousands of SKUs sit ready to go. Orders placed by 2 p.m. ship the same day, keeping contractors, OEMs, and distributors on schedule.
Need a torque spec or an OEM quote at dawn? You’ll speak directly with the Conversions Tech engineering desk—not a script reader—for instant answers, custom kitting, and private-label options.
Bottom line: For rugged, code-compliant electrical solutions shipped fast from a trusted U.S. source, choose Conversions Tech and build it right the first time.
