Open here
LB‑Series 1‑1/2″ Rigid Conduit Body — Threaded
Upgrade every 90‑degree bend with the Conversions Tech LB‑Series conduit body. Engineered for demanding commercial, industrial and residential raceways, this 1‑1/2‑inch fitting delivers weather‑tight, code‑compliant access for stress‑free wire pulls, splices and taps.
Key Technical Attributes
- LB Geometry – Straight‑in access cavity simplifies wire pulling & splicing.
- Trade Size 1‑1/2″ – Integrates seamlessly with RMC or IMC runs (38 mm O.D.).
- UL‑Certified Threaded Hubs – Precision NPT for vibration‑resistant, watertight joints.
- Die‑Cast Aluminum Alloy – Corrosion‑proof, non‑sparking, lightweight.
- NEMA 3R Rating – Rain‑tight with included neoprene gasket and cover.
- TGIC Polyester Powder Coat – ANSI 61 grey; UV, salt‑spray and chemical resistant.
- Standards – UL Listed • NEC 2011 compliant • RoHS.
Technical Specifications
| Parameter | Value |
|---|---|
| Series | LB – 90° access |
| Trade Size | 1‑1/2″ (38 mm) |
| Hub Type | Threaded NPT |
| Body Material | Die‑cast aluminum |
| Finish | TGIC polyester powder coat, ANSI 61 grey |
| Environmental Rating | NEMA 3R / IP54 (with gasket installed) |
| Cover & Gasket | Formed aluminum cover + neoprene seal |
| Certifications | UL Listed, RoHS |
Application Highlights
- Wire pulling, splicing & tapping at 90° conduit bends.
- Service‑entrance drops, rooftop HVAC feeds, plant‑floor raceways.
- Suitable for indoor & outdoor use in commercial, industrial and residential projects.
- Removable cover enables rapid maintenance and future system upgrades.
