32 products
AC Power Cords | IEC C13, C19, C5, C7 & NEMA 5-15P | PDU, Server, Appliance
The IEC power cord wall, by the box.
NEMA 5-15P to C13 for PCs and monitors, C14 to C13 for PDU-to-server, 12 AWG C20 to C19 for 20 A servers and UPS units, C5 cloverleaf for laptop bricks, figure-8 C7 for TVs and audio, polarized C7 for cable modems and set-top boxes, plus piggyback cords with a pass-through outlet and right-angle C13 extensions for tight rack cabling. 3, 6, and 12 ft. UL Listed, SJT or SPT-2 jacket as marked, bare-copper conductors. Stocked; same-day shipping; case pricing for IT, AV, and OEM buyers.
Pick by the connector on the device
| Device inlet | Cord | Rating | Typical use |
|---|---|---|---|
| C14 (3-pin, on PCs, monitors, PDUs) | NEMA 5-15P to C13 or C14 to C13 | 10 A, 18 AWG | Desktop, monitor, rack gear from a PDU |
| C20 (larger 3-pin, keyed) | C20 to C19, 12 AWG | 20 A, 250 V | Servers, UPS, high-draw switches |
| C6 cloverleaf (Mickey Mouse) | NEMA 5-15P to C5 | 7 A | Laptop power bricks, projectors |
| C8 figure-8 (2-pin, symmetrical) | NEMA 1-15P to C7 | 7 A | TVs, soundbars, game consoles, printers |
| C8 polarized (one side squared) | NEMA 1-15P to polarized C7 | 7 A | Arris and Motorola modems, set-top boxes |
| Need another outlet at the wall | Piggyback NEMA 5-15P/R to C13 | 10 A | Monitor + PC on one wall outlet |
| C13 device in a shallow rack | Right-angle C13 to C14 extension | 10 A | Low-profile exit behind switches and PDUs |
Gauge, jacket, and length
18 AWG SJT handles 10 A, which covers every C13 device; 12 AWG SJT is required for the 20 A C19/C20 class. SPT-2 is the flat two-conductor jacket on figure-8 cords. Length is a voltage-drop question only at 12 ft on 20 A loads; for everything else pick the shortest cord that reaches, because slack in a rack is a cable-management problem, not a spare.
Filters on this page: cord type, plug end, receptacle end, wire gauge, and length. Related: extension cords, racks and cabinets, data center power distribution. Case and OEM pricing →
