Lugs
Wire Ampacity Chart: NEC Table 310.16 Copper and Aluminum at 60, 75 and 90 C, Termination Rules, Temperature Correction and Bundling Derating
NEC Table 310.16 ampacities for THHN, THWN, XHHW and USE from 14 AWG to 1000 kcmil in copper and aluminum, why the 75 C column is the one that usually governs, the small-conductor cap in 240.4(D), the ambient correction and conductor-count adjustment factors, and how the lug's temperature rating ties the whole thing together.
Read more
Split Bolt vs C-Tap vs Insulated Multi-Tap (Polaris): Which Tap Connector to Use by Conductor, Location and Code
The three ways to tap or splice a feeder without a box full of lugs: split bolts, compression C-taps and insulated multi-taps. What each is listed for, where the NEC allows it, insulation requirements, and a selection table by job.
Read more
Lug Torque Chart: UL 486A/B Tightening Torque for Mechanical Lugs, Set Screws, Breaker Terminals and Bolted Connections by Conductor Size
The torque values for mechanical lugs, slotted and hex set screws, breaker and panelboard terminals, and the bolt torque for lug-to-bus connections, from UL 486A/B and NEC 110.14(D), with what over- and under-torque do and how to document it.
Read more
UL 486A, 486B, 486C, 467 and 6703 Explained: Which Listing an Electrical Connector Needs, and What Each One Actually Tests
A plain-language reference to the UL standards on connector markings: what each covers, what the test proves, and which one the NEC requires for lugs, splices, grounding connectors and PV connectors.
Read more
Compression Lug Die Chart: Die Index Numbers and Color Codes by Conductor Size for 12-Ton Crimpers (Burndy, T&B, Greenlee, Conversions Tech)
The complete die index and color code table for copper and aluminum compression lugs on 12-ton U-die crimpers, 8 AWG to 1000 kcmil, with the number of crimps per barrel and how to read the marking on the lug.
Read more
How to Choose a Mechanical Lug: Conductors, Holes, Dual-Rated AL9CU, Stud Size and Torque
Four questions pick the right mechanical lug every time: how many conductors, what range, how many holes, and what stud. Then torque it to the UL 486B number. With a part-number table for 14 AWG through 1000 kcmil.
Read more
Compression Lugs vs Mechanical Lugs: What UL 486A/B, NEC 110.14 and Your Inspector Actually Require
When a compression lug is mandatory, when a mechanical lug is fine, what the die color codes mean, and why long-barrel matters on fine-strand cable. A field guide with sizing tables.
Read more
