Starlink Mini 150 W Step-Up PoE Injector with Splitter, 5-in-1, No USB Ports | 12 V to 48 V, Gigabit Ethernet | CT-SK0041

A step-up PoE injector with a matched dish-end splitter for the Starlink Mini on 12 V vehicle and RV systems. It boosts battery voltage to 48 V and sends power and gigabit data up one Ethernet cable. At the dish, the splitter separates them into a DC plug and an RJ45 plug. You get 150 W of headroom and no inverter. "5-in-1" means a step-up converter, PoE injector, dish-end splitter, gigabit pass-through and surge protection in one kit. This unit has no USB ports.

Specifications

• Input: 12 V DC vehicle/RV systems (confirm range before ordering), screw-terminal DC input
• Output: 48 V DC PoE, 150 W max
• Data: gigabit pass-through, 10/100/1000 Mb/s
• Injector connections: screw-terminal DC input, RJ45 PoE port, status LED
• Splitter (dish end): DC plug and RJ45 plug
• Protection: OCP, OVP, OTP, SCP, reverse polarity and surge protection, auto recovery
• Cooling: passive, no fan

In the box

• 1 × 150 W step-up PoE injector
• 1 × dish-end PoE splitter with attached DC and RJ45 leads

Not included

• No USB ports. This unit has no USB-A or USB-C output. If you need USB charging ports, this is not the right injector.
• Starlink Mini, router, roof Ethernet cable, fuse and battery wiring are sold separately.

Install

Fuse the DC input at the battery, use bare-copper Cat6 for the run to the roof, ring terminals on the DC input and strain relief on every cable. Mount the injector in a dry location. For a simpler two-piece install see the 2-in-1 injector.

Starlink is a trademark of SpaceX; Conversions Tech is an independent distributor of compatible accessories.