

Conversions Tech Precision Die-Cast 1-Gang Electrical Box | Indoor / Outdoor Rated
Purpose-built for single-device installations—switches, GFCIs, sensors, or receptacles—this IP-sealed enclosure combines seamless A380 die-cast aluminum construction with a UV-stable powder-coat finish for uncompromising corrosion resistance in residential, commercial, or industrial environments.
Key Technical Specifications
Parameter | Value | Details |
---|---|---|
Material | A380 die-cast aluminum | 0.05 % max porosity, single-piece shell |
Finish | Polyester powder-coat RAL 7035 gray | ≥2.5 mil, 1 000 h salt-spray compliant |
Envelope | 2.80″ W × 4.50″ H × 2.70″ D | ±0.010″ machining tolerance |
Internal Volume | 18.3 in³ | Exceeds NEC 314.16(A) for 1-gang class |
Hub Size / Thread | ½″-14 NPSM | Thread relief + O-ring groove |
Hub Count / Locations | 3 total | (1) back, (2) sidewalls—aluminum closure plugs included |
Ground Provision | M4 × 0.7 mm green screw | <0.05 Ω bonding path |
Mounting | #10-24 stainless lugs | 3.50″ on-center, captive hardware |
Compliance | UL 514A / UL 50E | RoHS III • NEMA 3R/4 rated |
Installation Workflow
- Position & Anchor – Align box; secure via integrated lugs (25 lbf·in).
- Conduit Termination – Engage ½″ hubs 3½ turns; torque lock-nuts to 35 lbf·in.
- Device Wiring – Bond EGC to ground screw (12 lbf·in); maintain ¼-in strip length.
- Mount Device – Fasten switch/outlet to 6-32 bosses (8 lbf·in).
- Seal Unused Hubs – Install supplied plug + gasket (30 lbf·in).
- Verify Integrity – Meg-ohm test >100 MΩ @ 500 VDC; inspect cover gasket.
© 2025 Conversions Tech LLC. Specifications subject to change without notice.