100PCS EN Series Non-Insulated Wire Connector Ferrules Electrical Cable Terminal Brass Bare Tinned Crimp Terminal 22-10 AWG
Shipping calculated at checkout
SKU: 200497261:200000935#6.0mm2
In stock
Send a copy to email:
By entering your email, you agree that it will be seen by store and may contact you.
Open here
Conversions Tech EN-Series Insulated End Sleeves (Ferrules) — Precision Wire Termination
Conversions Tech EN-series insulated end sleeves (ferrules) provide a stable, low-resistance termination for finely stranded conductors used in control panels, PLC I/O, drives, terminal blocks, and field wiring. The rigid ferrule barrel supports uniform crimp compression while the insulating sleeve guides strands and delivers post-crimp strain relief and dielectric coverage.
Engineering Highlights
- Consistent Electrical Contact: Rigid barrel geometry maintains circular conductor profile for repeatable crimp compression and reduced contact resistance.
- Strand Management: Tapered insulating sleeve funnels fine strands to eliminate splay and improve insertion into terminal blocks and screw clamps.
- Service Reliability: Properly crimped ferrules improve vibration resistance and minimize cold-flow at the screw clamp interface over time.
- Application Domains: Industrial automation, building controls, motion systems, machine tools, marine/RV, low-voltage power distribution, and instrumentation.
Wire Range & Dimensions
Model code maps to metric cross-section (mm²) with AWG equivalence. Dimensions in millimeters.
| Model | Conductor Size | AWG (approx.) | L (mm) | D (mm) | C (mm) | W (mm) |
|---|---|---|---|---|---|---|
| EN0508 | 0.5 mm² | 22 AWG | 8 | 1.3 | 1.0 | 1.7 |
| EN7508 | 0.75 mm² | 20 AWG | 8 | 1.5 | 1.2 | 1.9 |
| EN1008 | 1.0 mm² | 18 AWG | 8 | 1.7 | 1.4 | 2.2 |
| EN1508 | 1.5 mm² | 16 AWG | 8 | 2.0 | 1.7 | 2.5 |
| EN2508 | 2.5 mm² | 14 AWG | 8 | 2.6 | 2.2 | 3.3 |
| EN4009 | 4.0 mm² | 12 AWG | 9 | 3.2 | 2.8 | 3.9 |
| EN6012 | 6.0 mm² | 10 AWG | 12 | 3.9 | 3.5 | 4.7 |
| EN10-12 | 10.0 mm² | 8 AWG | 12 | 4.9 | 4.5 | 5.8 |
| EN16-12 | 16.0 mm² | 6 AWG | 12 | 6.2 | 5.8 | 7.2 |
Specifications
- Terminal Type: Insulated end sleeve (ferrule) for crimp termination of stranded conductors.
- Insulator: Rigid sleeve for strain relief and dielectric isolation.
- Barrel: Precision metal ferrule engineered for uniform crimp deformation and high pull-out strength.
- Features: Anti-splay insertion, improved clamp contact area, vibration-resistant when correctly crimped.
- Chemical Disclosure: No high-concern chemicals per supplier declaration.
- Customization: Multiple sizes (0.5–16.0 mm²) and sleeve lengths available per model table.
Selection & Crimping Guidance
- Match the model to the conductor cross-section (mm²). AWG values above are approximate—verify by strand count and actual cross-section.
- Use a calibrated, ratcheting ferrule crimp tool with the correct die profile for the selected size.
- Strip conductor to the recommended length; insert until strands seat against the barrel stop.
- Crimp fully (complete latch cycle). Perform a pull test and visual inspection (no stray strands, full barrel compression).
- Insert into the terminal block/screw clamp; torque per device manufacturer specification.
Conversions Tech — Engineered terminations for reliable power, signal, and control.
4 Reasons Pros Buy Direct from Conversions Tech
Headquartered in business-friendly Wyoming, we design, test, and ship every product from inside the United States—delivering genuine “Made-for-America” quality without the big-box markup.
Our in-house team owns every CAD file, mold, and QA station behind our weatherproof boxes, conduit bodies, and power inverters. Vertical control means tighter tolerances, UL-listed safety, and up to 30 % lower cost than private-label imports.
Thousands of SKUs sit ready to go. Orders placed by 2 p.m. ship the same day, keeping contractors, OEMs, and distributors on schedule.
Need a torque spec or an OEM quote at dawn? You’ll speak directly with the Conversions Tech engineering desk—not a script reader—for instant answers, custom kitting, and private-label options.
Bottom line: For rugged, code-compliant electrical solutions shipped fast from a trusted U.S. source, choose Conversions Tech and build it right the first time.
