Telecom & Cell Site Grounding Hardware | Ground Bars, Lugs, Compression Connectors | Conversions Tech
Grounding and termination hardware for wireless carriers, tower contractors, and telecom distributors — MGB/CIGBE bar hardware, two-hole and 90° compression lugs, irreversible compression ring and rod connectors, and braided jumpers, cross-referenced to the Burndy, Panduit, and Harger numbers in carrier standards, stocked in Oxnard, CA.
By location on the site
| Location | What we supply | Standard |
|---|---|---|
| Buried ground ring and rod bed | Figure 8 rod-to-cable and figure 6 tap connectors, direct burial | Motorola R56; NEC 250.64(C); UL 467 (cross Burndy YGHR/YGHP) |
| Tower base, ice bridge, and cable entry | Two-hole compression lugs, 90° flag lugs, C-taps for down-conductor tees | NEMA 2-hole; UL 486A/B (cross Burndy YA-L 2TC, Panduit LCA-F) |
| Shelter / cabinet MGB and rack bars | Two-hole lugs 6 AWG–2/0, braided jumpers 12–24 in, grounding screws and pigtails, halo hardware | TIA-607-D; R56 |
| Equipment and door bonds | Braided bonding jumpers, insulated grounding bushings, bonding locknuts | NEC 250.98, 250.92 |
| DC power plant, −48 V | Battery cable lugs, busbar, MRBF and Class T fuse blocks, 350–750 kcmil lugs | UL 248; cross Blue Sea |
| Small cell and pole mounts | Split bolts, 1/2" strut clamps, EMT/rigid fittings, lay-in rebar and rod clamps | NEC 250, 358 (cross RACO, Bridgeport) |
Why tower crews and telecom distributors buy here
- Standards crosses on every page — the Burndy number, die index, and listing beside our part, so the site auditor sees like-for-like.
- Kits per site type — macro, rooftop, small cell — one PO, one carton per site, drop-shipped to the crew.
- 45° and 90° flag lugs in the sizes carriers actually spec, made to order in the ones nobody stocks.
Guides: Irreversible Compression Grounding — Where, How, and Why · 90°, 45°, and Straight Lugs · Grounding Bushings, Pigtails, and Braided Jumpers.
Contractor & distributor program → · Site BOMs to CS@conversionstech.com.
