Skip to content

compression lugs

DLO vs THHN vs Bare Copper Jumpers: Which Conductor and Lug to Use

Compares DLO, THHN/THWN-2 and bare copper jumpers by stranding class, ratings, flexibility and application, and explains why fine-strand DLO requires lugs identified for its conductor class.

How to Specify a Custom DLO Lug Jumper: Gauge, Lugs, Length, Tolerance

A line-by-line specification guide for custom DLO lug jumpers, from NEC 310.16 ampacity basis and fine-strand lug requirements to length convention, tolerance and documentation, with a spec checklist.

Powering a Data Center: Connectors, Grounding and Power Distribution Hardware From Utility Service to Rack

The connector, grounding and power distribution hardware a data center needs at every stage of the power path, with the spec points engineers check and crosses to the brands in most specs.

Compression Lug Die Index and Color Code Guide: Matching the Die to the Lug

The 12 ton U-die index and color code by conductor size, 8 AWG to 1000 kcmil, why the embossed index is the inspection mark, one crimp vs two, tool choices and a crimp inspection checklist.

One-Hole vs Two-Hole Compression Lugs and NEMA Hole Spacing

One hole or two is decided by the pad, not the conductor. Where each is used, the NEMA hole spacings that matter (1 inch on 3/8 bolts, 1-3/4 inch on 1/2 bolts), ground bar patterns, and the mistakes that get lugs rejected.

Long Barrel vs Standard Barrel Compression Lugs: Which to Specify

Long barrel lugs take two crimps and more conductor engagement; standard barrel lugs fit where space is tight. When each is the right spec, what stays the same, and why short barrel is just another name for standard.

Which Compression Lug for Which Wire Gauge: 10 AWG to 1000 kcmil Buying Table

Gauge by gauge, 10 AWG to 1000 kcmil: the lug family to order, one or two hole, studs stocked, die index and color code, and where each size shows up on the job. A stocking list for trucks and panel shops.

Compression and Mechanical Lugs for Industrial Panels, Switchgear Builders and OEMs

Panel shops and OEMs terminate the same conductor sizes hundreds of times a year. Consistency wins: one lug family, one die set, one part number per size. Mechanical vs compression, UL 508A and 486A/B, color code discipline, and why OEMs put Conversions Tech on the approved vendor list.

Compression Lugs for Wind Turbines and Hydroelectric Plants

Wind nacelles and towers run DLO on vibrating equipment; hydro plants run large copper in damp, mineral rich air. Both punish the wrong lug. What to specify for generator leads, down tower cable, brake and pitch drives, and hydro generator and excitation circuits.

Compression Lugs for Solar Farms, Utility PV and Battery Storage

From combiner boxes to inverter DC inputs, AC collection and BESS containers, utility-scale solar uses a specific set of lugs: tin plated copper for PV wire, AL9CU for aluminum collection feeders, flex and battery lugs on storage. What to spec and why installers stock Conversions Tech.

Compression Lugs and Grounding Connectors for Data Centers: Where They Land and What to Spec

Where compression lugs and grounding connectors land in a data center, from the ground ring and MGB to UPS battery strings, busway taps and generator paralleling gear, and why data center electrical contractors specify Conversions Tech as the stocked second source.

Cable Type to Lug Cross Reference: THHN, XHHW, DLO, Welding, Battery and Aluminum

One table that maps the cable on the reel to the lug family it needs: THHN, XHHW-2, USE-2, PV wire, DLO, welding cable, battery cable, MV feeder and aluminum. Stranding class decides the lug, not the gauge alone.
Back to top