Skip to content

installation

Gas Spring End Fittings Explained: Ball Socket, Ball Stud and M6

How M6 ball socket and ball stud gas spring end fittings work, how to install them, and the safety rules that keep a gas spring working.

Factory-Built vs Field-Crimped MC4 Jumpers: Where Terminations Fail and How to Avoid It

Why MC4 field terminations fail, how a factory jumper is crimped and tested, and when ordering to length beats crimping on the roof.

Split Bolt Connectors: Sizing, Torque, Taping, and Where the NEC Won’t Let You Use One

How to size, torque, and insulate copper split bolt connectors, what the equal-range and minimum-tap figures mean, and the NEC rules that decide where a split bolt is and is not permitted.

How to Crimp Irreversible Compression Grounding Connectors (C-Taps, Figure 6, Figure 8)

Step-by-step field procedure for crimping UL 467 irreversible compression grounding connectors: tool and die selection, conductor prep, crimp sequence, and the inspection marks that prove the joint.

Starlink RV Installation Guide: Mounts, Roof Entry & 12V Power (2026)

Mount selection, the five-step roof entry that never leaks, DC power without the inverter penalty, and the $130-225 parts list — the complete Starlink RV installation guide.

How to Install LED Ribbon Strip Lights: Complete Guide (2026)

LED ribbon (strip) lights are the most versatile lighting product for under-cabinet, cove, accent, display case, and ...

How to Install Compression Lugs: Step-by-Step Crimping Guide (2026)

A properly installed compression lug creates a gas-tight, permanent connection between a conductor and a terminal poi...

MC4 Solar Connector Guide: Types, Installation, and Compatibility (2026)

MC4 connectors are the universal standard for photovoltaic panel interconnections. Named for their manufacturer (Mult...

Ground Rod Installation Guide: NEC 250, Testing, Rod Selection, and Common Mistakes (2026)

Ground rod installation is one of the most fundamental tasks in electrical work, yet it is frequently done incorrect...
Back to top