Starlink Gen3 Cable, Waterproof Cat5e, 6 ft and 10 ft | Sealed RJ45 Plugs with Gasket Rings, Outdoor UV Jacket, Dish to Wall Socket Drop, Replacement Lead | CT-SK0106, CT-SK0110
Shipping calculated at checkout
SKU: CT-SK0106
Only 5 in stock
Open here
A short waterproof Cat5e cable with the sealed RJ45 plug and gasket rings the Starlink Standard Gen3 uses at the dish. It is the missing piece between a roof-mounted Gen3 and a Gen3 pass-through wall socket: 6 ft when the mount is directly above the entry, 10 ft for an arch, ladder rack or hardtop. It also replaces a chafed or cut factory lead at the dish end and brings the dish connection to a junction box on a cabin mast so ordinary Cat6 can run the rest of the way. UV-stable outdoor jacket, strain-relieved boots, and the rubber sealing rings that seat in the dish port and the socket.
| Specifications | |
| Lengths | 6 ft (CT-SK0106), 10 ft (CT-SK0110) |
| Category | Cat5e, 24 AWG bare copper, 4 pair, shielded |
| Connectors | Sealed RJ45 plugs with gasket rings and shielded shells, Gen3 dish-port fit |
| Jacket | Outdoor UV-resistant PE, black, -20 to 70 C |
| Data and power | Gigabit; passes the Gen3 router's PoE to the dish |
| Fits | Starlink Standard Gen3 (kickstand) dish and router. Not for the Mini, the original actuated Standard, or Performance Gen2 or Gen3 |
Where it goes
| Install | Length |
|---|---|
| Wall socket to a mount on the same wall or roof edge | 6 ft |
| Wall socket to a roof arch, ladder rack or hardtop | 10 ft |
| Replacing the last few feet of a damaged factory lead | 6 ft with a Gen3 inline coupler |
| Dish to a weatherproof junction box on a cabin pole | 10 ft |
Seal the socket with its cap when the dish is stowed and leave a drip loop below the plug so water runs off, not in. Install guide: Starlink Gen3 in an RV or cabin; choosing a dish: Mini vs Gen3.
Questions
Can I use this to extend the factory 50 ft cable? Yes, with a Gen3 inline coupler between them. Keep the total under 150 ft.
Is it the same connector as the Starlink cable? It is the sealed RJ45 with gasket rings that fits the Gen3 dish port and the Gen3 router. It is not a standard indoor RJ45; an ordinary patch cable will not seal in the dish.
Does it work with the Mini? No. The Mini uses a different cable and connector; see the Mini power line.
In stock and ships same day. Starlink is a trademark of SpaceX; Conversions Tech is an independent distributor of compatible accessories.
Why Pros Buy Direct from Conversions Tech
Engineered in the USA. Our U.S.-based engineering team designs and specifies our core product lines, and every product we carry — designed in-house or built to our exact specifications by certified partner factories — is quality-verified before it ships. UL/CSA listed where required, NEC compliant.
Cross-reference savings. Direct equivalents to Burndy, Hubbell, and other OEM part numbers at up to 30% less — same specs, same certifications, without the big-brand markup.
Real technical support. Need a torque spec, die reference, or an OEM quote? You’ll speak directly with the Conversions Tech engineering desk — not a script reader — for instant answers, custom kitting, and private-label options.
Fast US fulfillment. Orders in by 2PM ET ship same day from our US warehouse, nationwide ground and expedited.
