guide
Starlink Mini vs Standard Gen3 for an RV, Van or Boat: Power Draw, Speed, Mounting, Cost and Which One to Buy
The Mini runs on 12 V and fits a rail; the Gen3 is faster and hungrier. Side by side on power, throughput, size, mounting, in-motion rules, install hardware and total cost, with a recommendation by vehicle.
Read more
Starlink for Fleets and Work Trucks: The Four-Part Hardwire Kit, Roof Mounts at Highway Speed, and What Upfitters Spec
Utility crews, oil and gas, rural service fleets and first responders are putting Starlink Mini on trucks by the hundred. The hardware that upfitters standardize on, the in-motion rule, and a per-vehicle kit at about $200.
Read more
Starlink on a Boat: Mounting, 12 V Power, Cable Entry and Bonding for Mini and Gen3 Marine Installs
Salt, vibration and a hull with no ground make a boat the hardest place to install Starlink well. Mount choice, DC power off the house bank, a sealed deck pass-through, and ABYC bonding, with a parts list.
Read more
How to Choose a Mechanical Lug: Conductors, Holes, Dual-Rated AL9CU, Stud Size and Torque
Four questions pick the right mechanical lug every time: how many conductors, what range, how many holes, and what stud. Then torque it to the UL 486B number. With a part-number table for 14 AWG through 1000 kcmil.
Read more
Pop-Up Countertop Power: Cutout Sizes, Depth Below the Surface, UL 962A and the NEC 406.5 Rules for Kitchen Islands
Everything a designer, millwork shop or electrician needs before cutting a stone or solid-surface top: hole sizes, clearance under the counter, what the inspector wants to see, and which module fits which job.
Read more
Starlink Standard Gen3 in an RV or Cabin: Cable, Wall Socket, Power and Mount, Done Without a Hole in the Window Seal
The Gen3 kickstand dish is the most common Starlink on RVs and cabins and the hardest to install cleanly, because its cable is proprietary and its power draw is triple the Mini's. Here is the sealed, code-clean way.
Read more
Starlink Mini on 12 V: Fusing, Wire Gauge, Cable Entry and Grounding for RV, Van and Boat Installs
The complete 12 V hardwire for a Starlink Mini: which power path, what fuse, what wire, how to get the cable through the wall, and how to bond it. With a parts list that comes to under $150.
Read more
EMT Compression vs Set-Screw Fittings: NEC 358, Raintight Ratings and Where Each One Passes Inspection
Set-screw fittings are cheaper and faster, compression fittings are wet-location rated. NEC 358, UL 514B and the difference between raintight and concrete-tight, with a fitting-by-location table.
Read more
Compression Lugs vs Mechanical Lugs: What UL 486A/B, NEC 110.14 and Your Inspector Actually Require
When a compression lug is mandatory, when a mechanical lug is fine, what the die color codes mean, and why long-barrel matters on fine-strand cable. A field guide with sizing tables.
Read more
Cat6 vs Cat6A vs Cat8 in 2026: Which Cable Actually Pays Off for Offices, Wi-Fi 7 and Server Rooms
Wi-Fi 7 access points, 2.5G desktops and 25G server links have changed the math. A practical comparison of Cat6, Cat6A and Cat8 on bandwidth, distance, PoE heat and cost per drop.
Read more
Crimping Tool Buying Guide: Manual vs Hydraulic vs Battery (2026)
Choosing the right crimping tool depends on three factors: the wire sizes you work with most often, how many crimps y...
Read more
RV Electrical Guide: 12V Wiring, LED Upgrades, and Solar for Beginners (2026)
Whether you're upgrading your RV's lighting to LEDs, installing a solar charging system, or rewiring a battery bank, ...
Read more
